Reset To Factory Default Settings; Factory Default Settings - Weinzierl KNX IP LineMaster 762.1 secure Operation And Installation Manual

3 Reset to factory default settings

It is possible to reset the device to its factory default settings (see "Dev Reset" menu item).
In the factory default settings, the device has the individual address 15.15.0 and no group
addresses are connected. The IP address assignment is done via DHCP. Also, KNX Security is
disabled and the initial key (FDSK) must be used for secure commissioning.

3.1 Factory default settings

Individual addresses, KNXnet/IP tunneling connections and IP address assignment
Individual address: 15.15.0
Active KNXnet/IP tunneling connections: 8
Individual address of tunneling connection 1: 15.15.240
Individual address of tunneling connection 2: 15.15.241
Individual address of tunneling connection 3: 15.15.242
Individual address of tunneling connection 4: 15.15.243
Individual address of tunneling connection 5: 15.15.244
Individual address of tunneling connection 6: 15.15.245
Individual address of tunneling connection 7: 15.15.246
Individual address of tunneling connection 8: 15.15.247
IP address assignment: DHCP
© 2022 WEINZIERL ENGINEERING GmbH Seite 12/38