Weinzierl KNX IP LineMaster 762.1 secure Operation And Installation Manual page 6

"IP Config" submenu
2.2.4
Select DHCP or Manual for the IP configuration. Within Manual, you can set the IP, Subnet and
Gateway. Use buttons up
"IP Tunnel" submenu
2.2.5
The KNX IP LineMaster 762.1 secure supports 8 simultaneous KNXnet/IP tunneling connections.
In this submenu their current state and their individual KNX address are displayed.
"Filter" submenu
2.2.6
For commissioning or test purposes, the filter settings parameterized with the ETS can be
temporarily bypassed here. The settings for broadcast telegrams (BC), individual addressed
telegrams (IA) and group telegrams (GA
can be changed separately. The left side concerns the forwarding from the main line (IP) to the
subline (TP), the right side concerns the forwarding from the subline (TP) to the main line (IP).
The following selection options are available:
▪ Forward: –
▪
Block: x
▪
Filter: \
© 2022 WEINZIERL ENGINEERING GmbH
❹ ❺
and down to navigate and button enter
– main groups 0 to 13 and GA
0
❼
to select.
– main groups 14 to 31)
14
Seite 6/38