Weinzierl KNX IP LineMaster 762.1 secure Operation And Installation Manual page 21

ETS 5
In ETS 5, the selection "Use direct IP connection if available" can be selected in the menu under
"Bus – Connections – Options". The download then takes place directly in the device and is not
visible in the ETS group monitor.
ETS 6
In ETS 6, interfaces can be selected and configured in the ETS project via the "Interface" button.
All available connections are listed here.
By clicking on "Automatic" selects the "Automatic Bus Connection".
By clicking the gear next to "Automatic" the specific options appear.
Here, the selection "Direct IP connection if supported by target device" can be selected. The
download then takes place directly in the device and is not visible in the ETS group monitor.
© 2022 WEINZIERL ENGINEERING GmbH Seite 21/38