Ets Database; Secure Commissioning - Weinzierl KNX IP LineMaster 762.1 secure Operation And Installation Manual

8 ETS database

The ETS 5 database (for ETS 5.7 or newer) can be downloaded from the product website of the
KNX IP LineMaster 762.1 secure (www.weinzierl.de) or from the ETS online catalogue.
The KNX IP LineMaster 762.1 secure supports KNX Data Security to protect the device against
unauthorized access from the KNX bus. If the device is programmed via the KNX bus, this is done
with encrypted telegrams.

8.1 Secure commissioning

If the first product is inserted into a project with KNX Security, the ETS prompts you to enter a
project password.
This password protects the ETS project from unauthorized access. This password is not a key that
is used for KNX communication. The entry of the password can be bypassed with "Cancel", but
this is not recommended for security reasons.
ETS requires a device certificate for each device with KNX Security that is created in the ETS. This
certificate contains the serial number of the device as well as an initial key (FDSK = Factory
Default Setup Key).
© 2022 WEINZIERL ENGINEERING GmbH Seite 22/38