Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS AND PRECAUTIONS
13-11.Setting the Racks
Make sure that there is no excess water remaining in the racks before setting them into the
main unit. The racks have been designed so that the DEV rack is set first, then the FIX-
WASH rack can be inserted. They cannot be set in the reverse order.
Set each rack into the main unit so that the arrows and names on the rack exactly overlap
the arrows and tank names on the main unit. (Refer to the diagram below)
If the arrows and names do not exactly match, the rack ribs will not slide into their grooves
and the racks will wobble in the tanks.
SERVICE MANUAL
76
FIX-WASH Rack
WASH
FIX
WASH
WASH Tank
FIX Tank
DEV Rack
DEV
FIX
DEV
DEV Tank
Advertisement
Chapters
Table of Contents
