SunStar KM-2522 Series User Manual page 7

FOR SAFE OPERATION
1. To avoid electrical shock hazards, neither open the cover of the
electrical box for the motor nor touch the components mounted
inside the electrical box.
1. To avoid personal injury, never operate the machine with any of the
belt cover, finger guard of safety devices removed.
2. To prevent possible personal injuries caused by being caught in the
machine. Keep your fingers, head and clothes away from the
handwheel, cover and the motor while the machine is in operation.
In addition, place nothing around them.
3. To avoid personal injury, never put your hand under the needle when
you turn ON the power switch or operate the machine.
4. To avoid personal injury, never put your fingers into the thread
take-up cover while the machine is in operation.
5. The hook rotates at a high speed while the machine is in operation.
To prevent possible injury to hands, be sure to keep your hands away
from the vicinity of the hook during operation. In addition, be sure to
turn OFF the power to the machine when replacing the bobbin.
6. To avoid possible personal injuries, be careful not to allow your
fingers in the machine when tiling/raising the machine head.
7. To avoid possible accidents because of abrupt start of the machine,
turn OFF the power to the machine when tiling the machine head.
8. If your machine is equipped with a servo-motor, the motor does not
produce noise while the machine is at rest. To avoid possible
accidents due to abrupt start of the machine, be sure to turn OFF the
power to the machine.
9. To avoid electrical shock hazards, never operate the sewing machine
with the ground wire for the power supply removed.
10. To prevent possible accidents because of electric shock or
damaged electrical component(s), turn OFF the power switch in prior to
the connection/disconnection of the power plug.