Digital Display Screen; Display Screen Layout - KROHNE OPTIWAVE 3500 C Handbook

OPTIWAVE 3500 C

5.4 Digital display screen

If you remove the housing cover, you can push the buttons on the keypad. If you cannot remove
the housing cover, you can operate the keypad with a bar magnet. For more data, refer to Keypad
buttons on page 50.

5.4.1 Display screen layout

Display in Normal mode
Figure 5-1: Display screen layout in Normal mode (measurement data)
1 Current output percentage (bar graph)
2 Device status (NAMUR NE 107 symbols)
3 Device tag name
4 Keypad operation indicator (shown when you push a button or operate the keypad with a bar magnet)
5 Measurement value and units
6 Keypad buttons with Hall effect sensors (sensors sensitive to large changes in magnetic field strength)
The output percentage bar graph is only shown if you set "One Value and Bar" or "Two Values
and Bar" in menu items C6.4.1 Function (1st Meas. page) or C6.5.1 Function (2nd Meas. Page). If
menu item C6.4.2 1st Value Variable (1st Meas. page) is set to "Level", then the device shows
"Level" as the current output percentage in Normal mode (refer to item ① in the illustration).
02/2023 - 4005813604 - MA OPTIWAVE 3500 R04 en www.krohne.com
START-UP
5
49