Figure 10 H.323 Quick Setup Screen - Nortel VoIP Gateway Installation Manual

22 Initializing the VoIP Gateway

Figure 10 H.323 Quick Setup screen

9
In the IP Address box, enter the IP address for the VoIP Gateway.
If you do not know the IP address, contact your network administrator.
Note: You must use a static IP address for the VoIP Gateway.
10 If the VoIP Gateway is behind a router with NAT enabled, enter the NAT IP address for the
VoIP Gateway in the NAT IP Address box.
If you are not using NAT with the VoIP Gateway, do not change the NAT IP Address from
0.0.0.0.
Note: Nortel Networks recommends that you do not use the VoIP Gateway with NAT.
11 In the Subnet Mask box, enter the subnet mask for the VoIP Gateway.
If you do not know the subnet mask, contact your network administrator.
P0606297 02