Mounting The Voip Gateway On A Wall; Figure 4 Voip Gateway Wall Mount - Nortel VoIP Gateway Installation Manual

Mounting the VoIP Gateway on a wall

1 Remove the screw on the side of the VoIP Gateway that is nearest the bottom and the front
panel.
2
Insert the peg on the short bracket into the third air vent down on the column of air vents
nearest the front panel.
3
Swivel the bracket so that the side of the bracket is aligned with the base of the VoIP Gateway
and the hole in the bracket line up with the empty screw hole.
4
Attach the bracket using one of the screws provided in the VoIP Gateway packaging.
5 Repeat steps 1 to 4
6 Position the VoIP Gateway on the wall with the base of the device next to the wall.
7 Use four screws to attach the VoIP Gateway to the wall.
These screws are not provided with the VoIP Gateway.
You can now connect the cabling as described in
page 18.

Figure 4 VoIP Gateway wall mount

to attach a short bracket to the other side of the VoIP Gateway.
Mounting the VoIP Gateway
"Connecting the cables to the VoIP Gateway" on
Norstar VoIP Gateway Installation Guide
17