Using The Serial Interface - Nortel 600 Installing

Using the serial interface

You can use the serial interface to assign the Contivity 600 a management IP
address and subnet mask so that you can then use a Web browser for management.
To configure the management IP address using the serial interface:
1
Turn on the terminal or PC.
The terminal or PC should be configured as follows:
•
•
•
•
•
2
Connect the serial cable (supplied with the Contivity 600) from the gateway's
serial port to a terminal or to the communications port on a PC.
3
On the PC, start HyperTerminal
press Enter.
The Welcome screen appears.
Welcome to the Contivity Secure IP Services Gateway
Copyright (c) 1999-2004 Nortel Networks, Inc.
Version:
Creation date:
Date:
Unit Serial Number:
Please enter the administrator's user name:
Chapter 3 Configuring the management IP interface 37
Note: Nortel Networks recommends that you use the IP address
configuration utility instead of the serial interface to assign the
management IP address to the Contivity 600 (see
configuration utility" on page
9600 baud
8 data bits
1 stop bit
No parity
No flow control
34).
* or another terminal emulation program and
V04_90.120
July 27, 2004, 20:51:06
07/27/2004
317563
"Using the IP address
Installing the Contivity 600