Figure 15 Removing The Blank Bracket From The Option Card Slot - Nortel 600 Installing

4
Remove the blank PCI bracket by inserting a Phillips screwdriver into the slot
at the right of the blank PCI bracket and rotating the screw counterclockwise
(Figure 15).

Figure 15 Removing the blank bracket from the option card slot

Option card slot
Motherboard
5
Slide the option card into the option card slot
Note: Be careful not to bend the copper fingers in the slot.
Chapter 4 Installing option cards and DIMMs 51
Blank PCI bracket
(Figure
Phillips screwdriver
Screwdriver
slot
CS60010A
16).
Installing the Contivity 600