Testing The Configuration - Nortel 600 Installing

Hide thumbs Also See for 600:
Table of Contents

Advertisement

Testing the configuration

After you assign a management IP address to the Contivity 600, start your Web
browser to verify that you can access the gateway from the browser.
To manage the Contivity 600 using the GUI, your PC must be running one of the
following browsers:
Internet Explorer Version 5.5 or later
Netscape
To test the management IP address on the Contivity 600:
1
Open a Web browser.
2
In the URL field, enter http:// followed by the management IP address that
you assigned to the Contivity 600.
For example, if the management IP address is 10.2.3.2, enter http://10.2.3.2.
If the Welcome screen
management IP address for the Contivity 600.
3
Go to Configuring Basic Features for the Contivity Secure IP Services
Gateway for information about configuring the Contivity 600.
Chapter 3 Configuring the management IP interface 41
*
Navigator 4.79 or 6.2
(Figure
Note: If the Welcome screen does not appear, see
page
43.
11) appears, you correctly configured the
Installing the Contivity 600
"Troubleshooting" on

Advertisement

Table of Contents
loading

This manual is also suitable for:

Contivity 600

Table of Contents