Figure 2 Rear View Of The Contivity 600 - Nortel 600 Installing

Chapter 2 Cabling the gateway and turning the power on 23

Figure 2 Rear view of the Contivity 600

I/O EXPANSION BAY
CONSOLE
Connect the interface cables to the Contivity 600 in this order:
1
Connect the 10/100BASE RJ-45 cables to the built-in 10/100BASE Ethernet
LAN ports on the gateway (see
2 If you plan to connect a terminal or PC to the gateway, connect the serial cable
shipped with the Contivity 600 to the serial port (see
3
Connect the appropriate cables to the ports on the installed interface card.
If you ordered optional interface cards, connect the cables for these interfaces
to the ports.
LAN 1 FD LAN 0 RC DC INPUT
+12V-1.7A
-12V-0.1A
+5V-10A
75W MAX
Figure 2 on page
CS60002A
23).
Figure 2 on page
Installing the Contivity 600
23).