Page 1
Transitioning a Netwave AirSurfer Plus Network to a BayStack 650 802.11 Network September 1998 Formerly: AirSurfer Products...
Page 2
Electrical and Electronics Engineers (IEEE). This standard is similar to the 802.3 standard established for Ethernet wired LANs. NOTE: the BayStack 650 product line (formerly the AirSurfer Pro product line) is a Direct Sequence (DS) product and is not interoperable with the BayStack 650 products (formerly AirSurfer Plus products), which are based on a modulation technology called Frequency Hopping (FH).
Page 3
3. Insert the AirSurfer Wireless LAN PC Card Firmware Update Disk and type "asaflash" at the a:\ prompt. The ASAFLASH.EXE program will prompt you to verify the upgrade, and then proceed to upgrade the firmware in the adapter. 4. Repeat this for all the PC cards for your network. Nortel Networks page 3 September 1998...
Page 4
3. Insert the disk containing the Netwave 802.11 drivers you downloaded into your 3½ floppy drive (A:). 4. Click the Start button, select Settings, Control Panel. 5. Double click the “Network” icon. 6. Click on the Adapters tab. Nortel Networks page 4 September 1998...