Table of Contents
Advertisement
Available languages
Available languages
NOTICE
Risk of damage due to incorrect environmental conditions. This
product is not flame-resistant. Keep the product away from flames or
other heat sources.
The product should not come into contact with grease or acidic agents,
unguents and lotions, as this can reduce the useful life – especially of pads.
4 How to apply
1) Pull the brace on so that the opening fits around the patella, the central
seam is right at the front and the cushion ends up on the outside of
the patella. (In certain cases the cushion is to be placed on the inside,
contact your care provider if you feel unsure.)
2) Thread the lower band into the upper plastic ring, pull back and do up
the Velcro
fastener.
©
3) Thread the upper band into the lower plastic ring, pull back and fasten
the Velcro
.
©
4) The band regulates the pressure of the cushion against the patella.
5) Now the cushion will lie permanently against the side of the patella.
5 Washing instructions
1) Close all Velcro
2) Wash at 40 °C / 104 °F using a laundry bag, if possible.
3) Rinse thoroughly so that all residual detergent is removed.
4) Stretch while wet, and then dry.
6 Further Usage Restriction
The product is designed for use on one patient only. Re-use of the product
is not permitted.
The daily duration of use and period of application are dependent on the
medical indication.
fasteners.
©
9
Advertisement
Table of Contents
