5-16.
SSD Module (M.2)
Preparation
1.
Remove the top panel assembly. (Refer to
Procedure
1.
Remove the screw and then remove the SSD module from the connector of the iAP-005 board assembly.
Notch
SSD module (M.2)
Connector
iAP-005 board assembly
Note
When installing the SSD module, insert it securely into the connector of the iAP-005 board assembly.
2.
Install the removed parts by reversing the steps of removal.
PWS-110RX1A
"5-4. Top Panel
Assembly".)
PSW2.6 x 8
5-24