5.
User Account Control screen is displayed.
Click [Yes] to start the installation.
Tip
Sony SNMP PWS-100, Sony HKP Service PWS-100, Sony Web_Application_PWS-100 are installed and the built-
in storage (RAID_PKG) is updated.
Tip
A command prompt opens and closes during the installation. Wait until the installation finishes.
6.
After the installation is complete, make sure that there is no error, and then click "Finish".
If some error occurred, perform the
PWS-110RX1A
"1-4-1. Uninstallation of Application Software"
again.
1-12