5.
Click [Yes] to start the installation.
Note
A command prompt opens and closes during the installation. Wait until the command prompt closes.
Installing the RX1 Streaming Receiver
Procedure
1.
Connect the USB flash memory that contains the data file for update (Installation package) to the USB connector
on the unit.
2.
Open the Install package folder in the USB flash memory.
3.
Execute the StreamingReceiverAppInstallHelper.exe.
User Account Control dialog box is displayed.
4.
Check that "StreamingReceiverAppInstallHelper.exe" is displayed for the program name.
5.
Click [Yes] to start the installation.
Note
A command prompt opens and closes during the installation. Wait until the command prompt closes.
Initialization
Refer to the procedure of Software Update Guide supplied with update data file.
PWS-110RX1A
1-19