Setting Limits; Set The Limit Positions And Adjust Drive Speed - B&D Smart Pro SDO-9V3 Installation Instructions Manual

Smart Pro, Smart & Secure installation instructions

12. Setting Limits

12.1 Set the Limit Positions and adjust drive speed:

S E T T I N G L I M I T S
When setting the Close limit, ensure the position
tip
is when the door makes rst contact with the
ground. Alternatively for the Open limit the
position should be at the height of the garage
opening.
S T E P O N E
Switch power on
+
BLUE LED will ash
& gear LED lit
C L O S E L I M I T P O S I T I O N
S T E P O N E
HOLD
Take note of the speed as
door moves
MAIN LIGHT & BEEPER
x 3 + 3 x
x 2 + 2 x
x 1 + 1 x
S T E P T H R E E
HOLD
RELEASE
When at Press to
desired speed close door
W A R N I N G ! I n sett i ng t he clo se li mit p o s ition ,
do n o t fo rce t he
excessi ve force, as t hi s c an in te rfe re w it h th e
ea se of operati on
m ech a n i sm .
S T E P F I V E
If door overshoots
Press to position
Press
S T E P T W O
OR
To move the door to the
halfway point.
S T E P T W O
If Close speed not suitable,
release button, THEN
+
Each press
HOLD
changes speed
as per table
SPEED MODE
FAST (Default)
MEDIUM
SLOW
S T E P F O U R
When door near
close, single
presses inch door
CLOSE limit should be
when rubber strip touches
the ground
d o or i nto t he o o r with
o f th e manu al re leas e
Press to set
CAUTION! Limit setup is not available
when running on battery backup
Refer to Appendix F for setting limits via a
tip
transmitter. NOTE - Speed of the opener can
not be adjusted when using this method.
NOTE: The drive speed is set to the fastest setting by
default. This may not be suitable for larger doors or for
single piece doors. For tilt doors (J-Type only), please
refer to Appendix G for initial setup.
Refer to Appendix B & C for adjustments
to margins and Appendix E to set the PET
tip
Mode position
O P E N L I M I T P O S I T I O N
S T E P O N E
HOLD
Take note of the speed as
door moves
MAIN LIGHT & BEEPER
x 3 + 3 x
x 2 + 2 x
x 1 + 1 x
S T E P T H R E E
RELEASE HOLD
When at Press to
desired speed open door
W A R N I N G ! T h e d o o r w ill a u to m a t i ca l l y cl o s e.
o p e n a n d clo se a g a in af te r t h e next s te p.
E n su re t ha t no t h in g is in t h e d o o r's p a t h.
S T E P F I V E
If door overshoots
Press to position
Press
Door will open & close to calculate safety obstruction settings
11
S T E P T W O
If Open speed not suitable,
RELEASE button, THEN
+
Each press
HOLD
changes speed
as per table
SPEED MODE
FAST (Default)
MEDIUM
SLOW
S T E P F O U R
When door near
open, single
presses inch door
OPEN limit should be the
height of the garage
opening
Press to set