Table of Contents
Advertisement
30
en | Installing a pipe mount
3.
4.
5.
6.
Notice!
i
Hotplugging is not allowed for SFP fiber module. Power must be removed from the camera
before plugging in an SFP module.
2023-02 | V01 |
If you do not install fiber, skip to step 16.
To install fiber, complete the 8 steps that follow.
Remove the screws from the bottom of the pipe mount.
NDA-7100-PIPEF
NDA-7100-PENF
Install the SFP module into the fiber port in the mount. Push the SFP module into the
port until you hear the catch engage. Note: Ethernet communication is disable when an
SFP module is installed in a fiber mount (NDA-7100-PENF, or NDA-7100-PIPEF).
Connect fiber optic cable to the SFP module.
Installation Manual
AUTODOME 7100i│AUTODOME 7100i IR
Bosch Security Systems
Advertisement
Table of Contents
