Table of Contents
Advertisement
AUTODOME 7100i│AUTODOME 7100i IR
Lightning rod, down conductor, and electrode
–
–
–
Separate grounding electrodes
Some standards call for a common electrode for the equipment bus bar and the lightning rod.
Refer to NFPA 780, Class 1 & 2, UL96A, and to the equivalent code appropriate for the
country/region.
Metal pole grounding
If a metal pole is used, refer to NFPA 780, Class 1 & 2, UL96A, and to the equivalent code
appropriate for the country/region.
Camera Housings and Mounts
–
–
Bosch Security Systems
Note that the lightning rod down conductor connects directly to the grounding electrode.
Refer to NFPA 780, Class 1 & 2, UL96A, and to the equivalent code appropriate for the
country/region.
Follow the installation instructions of the lightning rod manufacturer.
Use only Bosch mounts listed on the datasheet of the specific camera.
Follow all grounding for the camera housings and mounts per the installation manual.
Installation Manual
Installing the camera outdoors | en
2023-02 | V01 |
19
Advertisement
Table of Contents
