Table of Contents
Advertisement
TE200 User Manual
5.1.2 WAN Settings
Figure 5-2 WAN Settings
3 connection types are supported: DHCP (obtain an IP automatically), PPPoE,
and Static IP Address.
Note:
1. WAN port is disabled by default.
2. WAN port cannot be used as a router to route the internet packages from
WAN port to LAN port.
·DHCP
If your ISP says that you are connecting through DHCP or a dynamic IP address
from your ISP, perform these steps:
Step1: Select DHCP as the WAN Connection Type.
Step2: Click Save button to save the settings.
Step3: Reboot the device.
Step4: Check the WAN's Status (Status Network Status).
18/57
Advertisement
Table of Contents
