Nortel 3050 Command Reference Manual page 441

Table 187
Administrative Applications Menu Options (/cfg/sys/adm) (cont'd.)
Command Syntax and Usage
clitimeout <timeout value in seconds [300-604800]>
audit
auth
telnet on|off
Copyright © 2007 Nortel Networks
.
/cfg/sys/adm Administrative Applications Configuration 441
Lets you enable SONMP (SynOptics Network Management Protocol)
participation. SONMP is a Nortel-proprietary layer-2 protocol for
discovering the topology of a network that contains SONMP-aware
devices.
•
on: Enables SONMP participation.
•
off: Disables SONMP participation.
To view the current network topology (requires that sonmp is set to
on), use the /info/sonmp command.
The default setting is off.
Sets the time frame of user inactivity for the automatic logout from
the CLI to occur. The default idle timeout value is 600 seconds (10
minutes), and the maximum value is 604800 seconds (7 days). Note
that a changed time-out value does not take effect until the next login.
To specify a value in minutes, hours or days, enter an integer directly
followed by the letter m, h,or d, e.g. 2h30m. If you enter an integer not
followed by one of these letters, seconds is implied.
If you have unapplied configuration changes when automatically logged
out from the CLI, the unapplied configuration changes will be lost. Make
sure to save your configuration changes regularly by using the global
apply command.
Displays the Audit settings menu. To view menu options, see
"/cfg/sys/adm/audit Audit Configuration" (page
Displays the Authentication menu. To view menu options, see
"/cfg/sys/adm/auth Authentication Configuration" (page
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
449).
452).