Nortel 3050 Command Reference Manual page 388

388 Command Reference
Table 154
Iauto Settings Menu Options (/cfg/vpn/linkset/link/iauto) (cont'd.)
Command Syntax and Usage
type auto|get|post|web
Copyright © 2007 Nortel Networks
.
Lets you run a wizard for creating an automatic login link to a
password-protected web page.
•
Login URL. Enter the URL to the password-protected web page, e.g.
https://inside.example.com/login/login.asp.
•
Values for input fields found on form. Specify which values to
insert in the fields when the remote user clicks the iauto link.
The <var:user> and <var:password> macros expand to the
logged in Portal user's credentials. The <var:domain> macro
expands to the domain name specified for the current authentication
method, using the /cfg/vpn #/aaa/auth # /domain command
(see "/cfg/vpn <id> /aaa/auth <id> Authentication Method
Configuration" (page
This command lets you view or configure the backend server's
authentication type. When the link is created the first time, the VPN
Gateway has automatically analyzed the web page's authentication type
and set it to auto.
If you keep this setting, the NVG will continue checking the web page's
authentication type each time a remote user clicks the iauto link. To
set a specific authentication type, use any of the get, post or web
settings.
•
auto. Indicates that the VPN Gateway automatically analyzes the
URL to determine the authentication type used on the backend
server.
•
get. Used for backend servers providing form-based authentication,
where the authentication form uses the GET method.
•
post. Used for backend servers providing form-based
authentication, where the authentication form uses the POST
method.
•
web. Used for backend web servers providing HTTP-based
authentication, such as NTLM or basic (www-authenticate). The link
automatically includes the user credentials provided on Portal logon
as authentication headers.
If the backend server requires a Windows domain (along with
user name and password), the domain name specified with the
/cfg/vpn #/aaa/auth #/domain command (see
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
177)).
"/cfg/vpn