Nortel 3050 Command Reference Manual page 356

356 Command Reference
Table 141
Port Forwarder Menu (/cfg/vpn/linkset/link/forwarder) (cont'd.)
Command Syntax and Usage
puser
ppass
/cfg/vpn <id> /linkset <id> /link <id> /forwarder <type>
/tunnel Port Forwarder Tunnel Configuration
[Tunnel 1 Menu] tmode- Set traffic mode
lhost- Set local host
lport- Set local port
rhost- Set remote host
rport- Set remote port
hmap - Set host mapping
del - Remove tunnel
The Tunnel menu includes commands to edit the tunnel properties of an
existing Port forwarder link.
Table 142
Tunnel Menu (/cfg/vpn/linkset/link/forwarder/tunnel)
Command Syntax and Usage
tmode <TCP/UDP>
lhost
Copyright © 2007 Nortel Networks
.
Lets you specify the port number of an intermediate intranet HTTP
Proxy server.
The pport command corresponds to the HTTP proxy port step in the
Quick Setup wizard.
If a HTTP Proxy host/port is specified and the HTTP Proxy host
requires authentication, you have the option to enter a user name and
password.
The puser command corresponds to the HTTP proxy user name step
in the Quick Setup wizard.
If a HTTP Proxy host/port is specified and the HTTP Proxy host
requires authentication, you have the option to enter a user name and
password.
The ppass command corresponds to the HTTP proxy password step
in the Quick Setup wizard.
Lets you specify which network protocol (UDP or TCP) should be used
for the selected tunnel.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007