Maint Maintenance Menu - Nortel 3050 Command Reference Manual

472 Command Reference

/maint Maintenance Menu

The commands in the Maintenance menu are used to send log file
information, or information about the current system internal status,
collected from one or all VPN Gateways, to a TFTP or FTP server for
technical support purposes.
[Maintenance Menu]
hsm - HSM menu
log - Logging system
dumplogs - Tech support dump log files to TFTP/FTP/SFTP server
dumpstat - Tech support dump current status to TFTP/FTP/SFTP server
chkcfg - Check applied configuration
starttrace - Start Trace
stoptrace - Stop Trace
Table 210
Maintenance Menu Options (/maint)
Command Syntax and Usage
hsm
dumplogs <protocol [tftp|ftp|sftp]> <server host name or IP address>
<destination file name> <collect info from all iSDs?> <FTP user
name and password>
log
Copyright © 2007 Nortel Networks
.
Note:
The HSM menu is only accessible for ASA 310-FIPS devices.
Displays the HSM menu. To view menu options, see
Hardware Security Module Menu" (page
Collects system log file information from the VPN Gateway you are
connected to (or optionally, all NVGs in the cluster) and sends the
information to a file in the gzip compressed tar format on the TFTP or
FTP server you have specified. The information can then be used for
technical support purposes.
The file sent to the TFTP/FTP/SFTP server does not contain any
sensitive information related to the system configuration, such as
certificates, private keys, and so on.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
"/maint/hsm
475).