Nortel 3050 Command Reference Manual page 379

/cfg/vpn <id> /linkset <id> /link <id> /citrix Citrix configuration 379
Table 148
WTS menu (/cfg/vpn <id>/linkset <>id/link/wts) (cont'd.)
Command Syntax and Usage
phost
pport
puser
ppass
/cfg/vpn <id> /linkset <id> /link <id>
/citrix
Citrix configuration
[Citrix Menu]
quick
mode
address
serverport
icabrowser
initpgm
screensize
colordepth
mapdrive
mapprinter
settingdlg
enabletzon
Copyright © 2007 Nortel Networks
.
Setup custom text to display in the port forwarder window. Meaningful
only when 'hidepf' is set to 'off'.
If the traffic is needed to go through an http proxy between the client
PC and NVG, please enter the IP address or domain name of the proxy
server here.
Relevant only when phost is set. Use this to set the port on the http
proxy to connect to. Default value is 'none'. If phost is set. then pport
should be set to some number between 1 and 65535.
Relevant only if host is set. If the proxy server requires authentication,
enter the user name here. If no authentication is required, leave this
empty. Maximum allowed length is 128.
Relevant only when phost and puser are set. If the http proxy requires
authentication, enter the password here. Maximum allowed length is
128.
- Quick citrix setup wizard
- Set Select Citrix mode
- Set Address
- Set ServerPort
- Set icabrowser list
- Set Initial Program
- Set screen size
- Set color depth
- Set map local drives
- Set connect local printers
- Set show settings button
- Set enable adding domain to trusted zone
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007