Nortel 3050 Command Reference Manual page 237

Table 82
Client Filter Menu Options (/cfg/vpn/aaa/filter) (cont'd.)
Command Syntax and Usage
comment
del
/cfg/vpn <id> /aaa/group <id> Group Configuration
[Group 1 Menu]
name - Set group name
access - Access rule menu
print- Print access rules
restrict - Set number of login sessions
usertype - Set portal user type
idlettl - Set login session idle time
sessionttl - Set maximum session length
vpnadmin - Allow VPN administration to group
ndwauser - Set Netdirect windows admin user name
ndwapasswo - Set Netdirect windows admin password
linkset - Linkset Menu
extend - Extended profiles menu
tgsrs- Set Tunnel Guard SRS Rule
wiper- Set use ActiveX component for clearing cache
citrix - Set Citrix support
netdirect - Allow Netdirect client
ippool - Set IP pool
ipsec- IPsec menu
comment - Set comment
del - Remove group
The Group menu is used to define the user groups that reside on the VPN
Gateway.
Copyright © 2007 Nortel Networks
.
/cfg/vpn <id> /aaa/group <id> Group Configuration 237
Lets you reference a previously created network definition identifying
a client network. To create a network definition, use the /cfg/vpn
#/aaa/network command.
Example: A branch office network is considered more secure. The
access rights specified for an extended profile whose client filter
identifies a branch office network could be more generous.
If the connects to the VPN from the branch office network, the extended
profile is triggered. If the user connects to the VPN from an Internet
café, no match is found between the user's source network and the
network referenced in the client filter. Only the base profile's access
rules are applied.
Lets you enter a comment for the current client filter.
Removes the client filter from the current configuration.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007