Barco CVM 2037 Instruction Manual page 32

ALIGNMENT (continued)
Automatic with Thoma
The monitor can be aligned automatically using a
TMF-3 or TMF-6 colour analyzer. As reference can be used the
monitor's internal White Field or your external White Field.
For alignment with an external signal, first apply a 100% White
Field to a composite input and select that input.
When via the menu's has been choosen for automatic alignment
with Thoma, you have next menu on the screen :
AUTOMATIC WITH THOMA
With internal signals
With external signals
Select 1 or 2.
AUTOMATIC ALIGNMENT MENU
ITEM
6500 K
3200 K
9300 K
To exit :
To continue
Use or to move the red field.
UP DOWN
Press TGL to modify data in the red field :
You can only change peak white level when you select
6500 K.
After selection of 6500 K and pressing ENTER, the following menu
will appear :
AUTOMATIC ALIGNMENT
Peak white level selection
Range : from 60 to 151 nit
Peak white level = 090
Note : 1 nit =
1 fL = 3.43 nit
To change between fL and nit :
To change value :
To exit :
To proceed :
Enter peak white level (060 nit to 151 nit or 018 to 044 fL).
Proceed by pressing
ENTER .
25
1
2
SELECTION STATUS
NO
NO
NO
CLEAR
ENTER
nit
0.292 fL
0-9
CLEAR
ENTER
TM
Thoma TMF-2,
NO / YES .
for
YES
TOGGLE