Barco CVM 2037 Instruction Manual page 39

Setup elimination = 00
ALIGNMENT (continued)
Service page (continued)
WARNING !
Do you want to save the new values ?
NO : Press CLEAR
YES : Press 0 followed by ENTER
Press 0 if you want to save.
In case of a NTSC input signal, it is possible to eliminate and so
compensate the setup of 7.5%.
Selecting " Setup elim. 7 " in the service page menu allows you to
calibrate this compensation value; use UP or DOWN to align.
The value between 000 and 020 is visible on the screen
Use 0 followed by ENTER to store the value. You get also a
warning message as shown above.
32