Table of Contents
Advertisement
Electrical Installation
January 2023
Procedure
1. Install security wire seal into and through two of the four the holes in the
2. Position the wire to prevent counterclockwise rotation of the screws when
3. Twist and adjust wire removing all slack and seal.
4. Cut wire ends to remove excess wire.
3.7.4
Bolted band shroud security seals
If required, use the following instructions to install bolted band shrouds security
wire seals.
62
socket head screws on the Junction Box cover (maximum wire diameter
0.078 inch; 2.0 mm).
Figure 3-11: 3812 Remote mount transmitter electronics option
A. Junction Box socket head screws
the seal wire is taut.
This completes installing security seals on the Junction Box.
Installation manual
00825-0100-3812
Rosemount 3812 Liquid Ultrasonic Flow Meter
Advertisement
Table of Contents
