Deleting A Packet Filter; Displaying Packet Filters; Displaying Packet Filters Applied To An Interface - Nortel Secure 4134 Configuration

114 Packet filter configuration
3
Deleting a packet filter
Delete configured packet filters. To delete a packet filter, you must first
remove it from all associated interfaces.
Procedure steps
Step
1
2
Displaying packet filters
Procedure steps
Step
1
Displaying packet filters applied to an interface
Procedure steps
Step
1
Copyright © 2007, Nortel Networks
.
To specify the line number of the rules to delete from the packet
filter, enter:
delete <1-65535>
Action
To enter configuration mode, enter:
configure terminal
To specify the packet filter to delete, enter:
no {mac | ip | ipv6} packet-filter <packet-filter-name>
Action
To display a packet filter, enter:
show packet-filter <packet-filter-name>
Action
To display a packet filter, enter:
show packet-filter-rules <interface-name>
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600 01.02 Standard
10.0 3 August 2007
—End—
—End—
—End—