Configuring Radius Client Source Address; Configuring Tacacs+ Primary Or Secondary Server Ip Address - Nortel Secure 4134 Configuration

206 Authentication, Authorization, and Accounting configuration
Table 112
Variable definitions
Variable
1-100
Configuring RADIUS client source address
Configure the IP address of the RADIUS client. This address will be used
for all packets sent from the RADIUS client to the RADIUS server.
Procedure steps
Step
1
2
Configuring TACACS+ primary or secondary server IP address
Configure the IP address of the primary or secondary TACACS+ server.
Procedure steps
Step
1
2
Copyright © 2007, Nortel Networks
.
time_out <1-100>
Value
The timeout in seconds. The maximum value is 100.
Action
To enter configuration mode, enter:
configure terminal
To configure the IP address of the RADIUS client, enter:
aaa radius src_adress <A.B.C.D>
Action
To enter configuration mode, enter:
configure terminal
To configure the IP address of the primary or secondary server,
enter:
aaa tacacs [primary_server |secondary_server] <A.B.C.D>
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600 01.02 Standard
10.0 3 August 2007
—End—
—End—
—End—