Configuring Quiet Period; Nortel Secure Router; Enabling Reauthentication - Nortel Secure 4134 Configuration

Table 116
Variable definitions
Variable
auto
force-authorized
force-unauthorized
no
Configuring quiet period
Set the quiet-period time interval. The default is 60 seconds.
When the system cannot authenticate a client, the system remains idle for a
quiet-period interval of time, then tries again. By administratively changing
the quiet-period interval, by entering a lower number than the default, a
faster response time can be provided.
Procedure steps
Step
1
2
3
4

Enabling reauthentication

Enable or disable reauthentication on a port.
Copyright © 2007, Nortel Networks
.
Value
Enable authentication on a port.
Force a port to always be in an authorized state.
Force a port to always be in an unauthorized state.
Removes the port from 802.1x management.
Action
To enter configuration mode, enter:
configure terminal
To specify the Ethernet interface to configure, enter:
interface ethernet <slot/port>
To specify 802.1x configuration, enter:
dot1x
To configure the quiet period, enter:
quiet-period <1-65535>

Nortel Secure Router 4134

Security — Configuration and Management
NN47263-600 01.02 Standard
10.0 3 August 2007
Configuring 802.1x on an Ethernet interface 211
—End—
—End—