Nortel Secure 4134 Configuration page 140

140 IPsec VPN configuration
3
4
5
Table 65
Variable definitions
Variable
domain-name "<fqdn>"
email-id "<email>"
der-encoded-dn
"<name>"
Configuring IKE mode for remote access VPN
Configure the IKE mode for the remote access policy.
Procedure steps
Step
1
2
3
4
5
Copyright © 2007, Nortel Networks
.
To specify configuration of remote access IKE policies, enter:
dynamic
To specify the remote access IKE policy to configure, enter:
ike policy <policy-name> {modecfg-group | l2tp-group}
To configure the remote ID, enter:
remote-id {domain-name "<fqdn>" | email-id "<email>"|
der-encoded-dn "<name>"}
Value
Specifies the fully qualified domain name (FQDN),
like router.com. The value must be specified within
quotes.
Specifies a fully-qualified email user name string,
like name@router.com. The value must be specified
within quotes.
Specifies the x.500 (LDAP) distinguished name. The
value must be specified within quotes.
Action
To enter the configuration mode, enter:
configure terminal
To specify crypto configuration for IPsec and IKE, enter:
crypto
To specify configuration of remote access IKE policies, enter:
dynamic
To specify the remote access IKE policy to configure, enter:
ike policy <policy-name> {modecfg-group | l2tp-group}
To configure the IKE mode, enter:
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600 01.02 Standard
10.0 3 August 2007
—End—