Configuring Remote Access Ipsec Policies; Creating An Ipsec Policy For Remote Access Vpn - Nortel Secure 4134 Configuration

Table 75
Variable definitions
Variable
kilobytes <300-419430
3>
seconds <300-864000>
Configuring remote access IPsec policies

Creating an IPsec policy for remote access VPN

Create an IPsec policy for a remote access IPsec SA.
Procedure steps
Step
1
2
3
4
Table 76
Variable definitions
Variable
group-type [modecfg-gr
oup | l2tp-group]
Copyright © 2007, Nortel Networks
.
Value
Lifetime in kilobytes. Default: unlimited.
Lifetime in seconds. Default: 86400 seconds.
Action
To enter the configuration mode, enter:
configure terminal
To specify crypto configuration for IPsec and IKE, enter:
crypto
To specify configuration of dynamic IKE policies for remote access,
enter:
dynamic
To create a remote access IPsec policy, enter:
ipsec policy <name> {modecfg-group | l2tp-group}
Value
modecfg-group: Mode config group. To configure
the mode config client parameters, use the ike
policy client commands.
l2tp-group: L2TP group. To configure the L2TP
server and client parameters, use the l2tp-server
commands.
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600 01.02 Standard
10.0 3 August 2007
Configuring remote access IPsec policies 151
—End—