14
|
About the box
14 About the box
14.1 Indoor unit
14.1.1 To unpack and handle the unit
Installer and user reference guide
44
Keep the following in mind:
▪
At delivery, the unit MUST be checked for damage and completeness. Any
damage or missing parts MUST be reported immediately to the claims agent of
the carrier.
▪
Bring the packed unit as close as possible to its final installation position to
prevent damage during transport.
▪
Prepare in advance the path along which you want to bring the unit to its final
installation position.
▪
When handling the unit, take into account the following:
Fragile, handle the unit with care.
Keep the unit upright in order to avoid damage.
INFORMATION
The following figures are just examples and may NOT completely match your system
layout.
WARNING: MILDLY FLAMMABLE MATERIAL
The R32 refrigerant (if applicable) in this unit is mildly flammable. Refer to the
outdoor unit specifications for the type of refrigerant to be used.
Use a sling of soft material or protective plates together with a rope when lifting
the unit in order to avoid damage or scratches to the unit.
1 Lift the unit by holding on to the hanger brackets without exerting any
pressure on other parts, especially on refrigerant piping, drain piping and
other resin parts.
1
2
FDA125A5VEB
Split system air conditioners
4P495031-1B – 2022.10