Specific Installer Safety Instructions - Daikin FDA125A5VEB Manual

3 |

Specific installer safety instructions

3 Specific installer safety instructions
Installer and user reference guide
16
Always observe the following safety instructions and regulations.
General
WARNING
Make sure installation, servicing, maintenance, repair and applied materials follow
the instructions from Daikin (including all documents listed in "Documentation set")
and, in addition, comply with applicable legislation and are performed by qualified
persons only. In Europe and areas where IEC standards apply, EN/IEC 60335-2-40 is
the applicable standard.
Unit installation (see "16 Unit
WARNING
Installation shall be done by an installer, the choice of materials and installation shall
comply with the applicable legislation. In Europe, EN378 is the applicable standard.
WARNING
The appliance using R32 refrigerant shall be stored so as to prevent mechanical
damage and in a well-ventilated room without continuously operating ignition
sources (e.g. open flames, an operating gas appliance, or an operating electric
heater). The room size shall be as specified in the General safety precaution.
CAUTION
Appliance NOT accessible to the general public. Install it in a secured area, protected
from easy access.
This unit is suitable for installation in a commercial, light industrial, household and
residential environment.
WARNING
For units using the R32 refrigerant it is necessary to keep any required ventilation
openings clear of obstructions.
Duct installation (see "16.2.2 Guidelines when installing the
WARNING
Do NOT install operating ignition sources (example: open flames, an operating gas
appliance or an operating electric heater) in the duct work.
4
installation" [ 49])
4
ducting" [ 54])
FDA125A5VEB
Split system air conditioners
4P495031-1B – 2022.10