18
|
Electrical installation
18 Electrical installation
In this chapter
18.1 About connecting the electrical wiring
18.1.1 Precautions when connecting the electrical wiring
Installer and user reference guide
64
18.1
About connecting the electrical wiring ..................................................................................................................................
18.1.1
Precautions when connecting the electrical wiring ..............................................................................................
18.1.2
Guidelines when connecting the electrical wiring ................................................................................................
18.1.3
Specifications of standard wiring components .....................................................................................................
18.2
To connect the electrical wiring to the indoor unit ...............................................................................................................
Typical workflow
Connecting the electrical wiring typically consists of the following stages:
1
Making sure the power supply system complies with the electrical
specifications of the units.
2
Connecting the electrical wiring to the outdoor unit.
3
Connecting the electrical wiring to the indoor unit.
4
Connecting the main power supply.
DANGER: RISK OF ELECTROCUTION
WARNING
▪
All wiring MUST be performed by an authorised electrician and MUST comply
with the applicable national wiring regulation.
▪
Make electrical connections to the fixed wiring.
▪
All components procured on-site and all electrical construction MUST comply
with the applicable legislation.
WARNING
ALWAYS use multicore cable for power supply cables.
INFORMATION
Also read the precautions and requirements in the
4
precautions" [
INFORMATION
Also read
"18.1.3 Specifications of standard wiring
7].
"2 General safety
4
components" [
67].
FDA125A5VEB
Split system air conditioners
4P495031-1B – 2022.10
64
64
65
67
67