Components And Specifications - Guardian Fall Protection Edge Series Instruction Manual

Compatibility: When making connections with Edge Series Web SRL, eliminate all possibility of roll-out.
Roll-out occurs when interference between a hook and the attachment point causes the hook gate to
unintentionally open and release. All connections must be selected and deemed compatible with Edge Series
Web SRL by a Competent Person. All connector gates must be self-closing and self-locking, and withstand
minimum loads of 3,600 lbs. See the following for examples of compatible/incompatible connections:
Connector
closed and
locked to
OK.
D-ring.
Two or more
snap hooks or
carabiners
connected to
NO.
each other.
Two connectors
to same
D-ring. NO.
Incompatible
or irregular
application,
which may
increase risk
of roll-out. NO.

Components and Specifications

Made from some or all of the following components: galvanized steel, stainless steel, aluminum, zinc-plated
steel, polyester, and nylon.
Class B SRL.
Average arrest force: 900 lbs.
Maximum arrest force:1,800 lbs.
Maximum deceleration distance: 54".
Connector
Part # Length
10900 11'
10900-AR 11'
10901 11'
10909 20'
20900 8'
20907 7'
3
Lifeline Shock absorber
1" Nylon Webbing w/Carabiner, Swivel Top, & Snap Hook
1" Nylon Webbing w/Aluminum Carabiner, Swivel Top, & Aluminum Snap Hook
1" Nylon Webbing w/Carabiner, Swivel Top, & Snap Hook
1" Nylon Webbing w/Carabiner, Swivel Top, & Snap Hook
1" Nylon Webbing w/Carabiner, Swivel Top, & Snap Hook
1" Nylon Webbing w/Carabiner, Swivel Top, & Snap Hook
Web Housing Carabiner
Description
Connector
to integral
lanyard.
NO.
Connector
directly to
webbing.
NO.
Application
that places
load on gate.
NO.
Connector
directly to
horizontal
lifeline. NO.