Operation Of The Device - INVENTOR PSB20060INL User Manual

5. OPERATION OF THE DEVICE

We recommend that you use the device according to the
instructions listed below. When you start your refrigerator for
the first time, the temperature of the maintenance chamber
is set to 4°C. If you want to change the temperature, follow
the instructions below.
Note: A high temperature setting will result in more
immediate food spoilage
Temperature control
Attention!
When you set a temperature, you are setting an average
temperature for the entire refrigerator compartment. The
temperature inside each compartment may differ from the temperature shown in the
table, depending on the amount of food and the position in which it is placed. The ambient
temperature may also affect the actual temperature inside the appliance.
Fridge compartment.
Press "ZONE CHOICE"" the " " light turn on.
Then press "SET TEMP" to set the desired temperature between 2°C and 8°C as required.
The display panel will show the corresponding values according to the following sequence.
8
Freezer
Press "ZONE CHOICE"" the " " light turn on. Then press "SET TEMP" and you can set the
temperature between -14°C and -24°C as required.
-18°C -19°C -20°C
-17°C -16°C
Super Freeze (
The Super Freeze function quickly reduces the temperature in the freezer and food freezes
faster. This preserves the vitamins and nutrients in fresh food and keeps food fresh for longer.
• You can press SUPER to start the super freezer function.
• When the super freezer mode is selected, the light comes on and the freezer temperature
is set to -24°C.
• In case you want to freeze the maximum amount of food, wait for about 24hours.
• The Super freeze function is automatically deactivated after 52 hours and then the freezer
temperature returns to the previous setting.
EN
-22°C- 23°C
-21°C
-15°C -14°C -24°C
)
15