Reversing The Door - INVENTOR PSB20060INL User Manual

3. REVERSING THE DOOR

The side on which the door opens can be changed from the right (as delivered) to the left, if
required by the installation location.
Warning!
When changing the door, the appliance must not be connected to the power supply. Make
sure that the plug is unplugged.
Tools you will need
• If it's necessary, you can place the refrigerator horizontally on its back to access the base.
You should rest it on foam packing material or similar material to avoid damage to the back
of the refrigerator. To reverse the door, the following steps are recommended.
EN
①
②
8mm socket wrench
Cross-shaped screwdriver
Door racks
Not provided
Thin-blade screwdriver
8mm wrench
1. Stand the refrigerator upright. Open the top
door, remove all shelves (to avoid damage) and
close the door again.
9