INVENTOR PSB20060INL User Manual page 11

MODEL WITH DISPLAY
C (
(
MODEL WITH DISPLAY
EN
)
( )
)
( )
6. Remove the cover (1) from the upper left side of the
7. Unscrew the screw (3) and remove the fitting (2) and
④
8. Use the Allen wrench and the cross wrench to unscrew
9. Place the lower door on a smooth surface with the
upper door and remove the connector (2). Remove the
cover (3) from the right side and insert the connector
(4) inside, reinstall the cover (1) and (3).
the fitting (1). Insert door-stop-left (4) and door-stop-
left (5) (supplied in the plastic bag) on the left side with
screw (3). Keep the accessory (1) and accessory (2)
together with the device for future reference.
the screws and remove the middle hinge. Then remove
the bottom door.
outer surface facing upwards. Unscrew the screw (3)
and remove the fitting (2) and the fitting (1). Then place
the door-stop-left (4) and door-stop-left (5) (supplied in
the plastic bag) on the left side and secure them with
the screw (3). Keep the accessory with the device for
future reference
11