Cleaning And Care - INVENTOR PSB20060INL User Manual

Bottom freezer
Table of Contents

Advertisement

Available languages

Available languages

Switching off the appliance
If the appliance must be switched off for an extended period, the following measures should
be taken to prevent mold growth in the appliance.
1. Remove all food.
2. Unplug the power plug from the outlet.
3. Clean and dry the inside of the appliance thoroughly.
4. Make sure all doors are slightly open to allow air to circulate.

8. CLEANING AND CARE

For hygiene reasons, the interior of the appliance, including the internal accessories, should be
cleaned regularly. The appliance shall be cleaned and maintained at least every two months.
Warning!
During cleaning, the appliance must not be connected to the power supply. Before cleaning,
switch off the appliance and remove the plug from the power supply or turn off the fuse or
the general power switch.
External cleaning
• Spray the cleaning cloth with water, not the surface of the appliance. This distributes
moisture evenly over the surface.
• Clean the doors, handles and surfaces with a mild detergent and then dry with a soft cloth.
Warning!
• Do not use sharp objects as they may scratch the surface.
• Do not use solvents, car detergents, bleach, essential oils, abrasive cleaners or organic
solvents such as petrol for cleaning. They may damage the surface of the appliance and
cause a fire.
Interior Cleaning
You should clean the inside of the device regularly. Cleaning is easier and more practical
when there is little food stored. You can remove the drawers and shelves for more thorough
cleaning. Wipe the inside of the freezer with a dilute solution of water and baking soda, then
rinse with lukewarm water and a wrung-out sponge or cloth. Wipe and dry completely before
reinstalling the shelves and baskets. Thoroughly dry all surfaces and removable accessories
before putting them back in place.
Although this appliance has automatic defrosting, a layer of ice may appear on the inside
walls of the freezer if you open the door frequently or keep it open for a long time. If the ice
layer is very thick, select a time when the freezer is almost empty and proceed as follows:
1. Remove food and baskets, unplug the appliance, and leave the doors open. Ventilate the
room well to speed up the process.
2. When defrosting is complete, clean the freezer as described above.
20
EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PSB20060INL and is the answer not in the manual?

Table of Contents