INVENTOR PSB20060INL User Manual page 13

15. Attach the connector (1) as shown, and then fix the
cover (2) with the screws (3) following Step 2.
16. Open the top door, insert the door shelves, and close
it.
Note:
If your appliance has an external handle, you will need to
change the time on this as well according to the instructions
below. Place the bottom door on a smooth surface with
the outer surface facing up. Remove the protective plugs
1 & 4 and then unscrew the screws (2) as shown in the
picture below. Change the handle to the correct side and
replace the screws (2) and protective plugs 1 & 4
respectively.
13
EN