Operation Of The Device - INVENTOR PSB20070INL User Manual

5. OPERATION OF THE DEVICE

We recommend that you use the device according
to the instructions listed below. Your device has the
corresponding functions as shown in the Control Panel.
When you start your refrigerator for the first time, the
control panel will illuminate its symbols. If you do not press
an option and have the doors closed, the illumination on
the control panel will be turned off..
Temperature control
Attention!
When you set a temperature, you are setting an average
temperature for the entire refrigerator compartment. The
temperature inside each compartment may differ from the
temperature shown in the table, depending on the amount
of food and the position in which it is placed. The ambient
temperature may also affect the actual temperature inside
the appliance.
Fridge compartment
Press "ZONE CHOICE"" the " " light turn on. Then press "SET TEMP" to set the desired
temperature between 2°C and 8°C as required. The display panel will show the corresponding
values according to the following sequence.
8
Freezer
Press "ZONE CHOICE"" the " " light turn on. Then press "SET TEMP" and you can set the
temperature between -14°C and -24°C as required.
-14°C- 15°C
-24°C-
Super Freeze ( )
The Super Freeze function quickly reduces the temperature in the freezer and food freezes
faster. This preserves the vitamins and nutrients in fresh food and keeps food fresh for longer.
• You can press SUPER to start the super freezer function.
• When the super freezer mode is selected, the light comes on and the freezer temperature
is set to -24°C.
• In case you want to freeze the maximum amount of food, wait for about 24hours.
• The Super freeze function is automatically deactivated after 52 hours and then the freezer
temperature returns to the previous setting.
16
.........
23°C
EN