INVENTOR PSB20060INL User Manual page 10

①
Self-tapping screws
②
Upper hinge cover
①
screws
②
③
MODEL WITH DISPLAY
C ( )
10
(
2. Remove the screw (1) and then remove the cover (2)
from the upper right side.
3. Remove the screws (1) and then remove the cover (2).
Because the refrigerator has a screen on the door, you
must pass the connector through the hinge hole (When
installing, hold the door by hand.).
4. Remove the top door from the middle hinge by lifting it
vertically with care. Then place the top door on a smooth
surface with its outer surface facing upwards.
5. Place the cover (1) (supplied in the plastic bag) on the
top right side. Then remove the cover (2) from the top
left side of the device and place it inside the plastic bag.
( )
)
( )
EN