Prepaid-Card; Selecting The Drying Programme; Debit The Programme Amount And Start; Displays During The Programme Sequence - Schulthess TW 7000 Instructions For The Use

prePaid-Card

Selecting the drying programme

X Select the drying programme
X Select the additional functions
X In the display will appear the price of the programme.

Debit the programme amount and start.

X Insert the prePaid-Card. In the display will appear in
succession the amount stored on the prePaid-Card, the
programme amount which will be deducted, as well as
the new prePaid-Card balance.
Any remaining credit balance stored in the appliance will
be set off.
X Remove the prePaid-Card.
X Start the drying programme.

Displays during the programme sequence

No credit will be shown for the duration of the drying
programme.

Re-crediting

It is possible to reverse the remaining credit onto the
prePaid-Card
X Insert the prePaid-Card. The amount stored on the
card will appear in the display.
X Re-credit by pressing the fast forward button. In the
display will appear in sequence the remaining credit
balance which will be credited, as well as the new pre-
Paid-Card balance.
X Remove the prePaid-Card.
Re-crediting can always be made only to that prePaid-
Card from which the amount was originally deducted.
In the case of active child safety device:
Press the fast forward button.
Remaining value transfer
If there is not an adequately high remaining amount
available on a prePaid-Card to pay for the booking on
account, this will be displayed by the whistle signal and
by the message «Saldo to small». By inserting a second
prePaid-Card, the difference can be pai d.
66
Problems

Error messages

If the following error messages are displayed, the pro-
gramme can be restarted by pressing the start button
once the error has been rectified.
«CHILD LOCK ACTIVE»
X Hold the start button down and press the fast
forward button (see chapter «Basic settings»).
«PLEASE CLOSE DOOR»
X Push door closed until lock engages.
«COND. WATER FULL»
X Condensate water pump is not running.
Check if the water discharge hose is bent or the water
discharge provided by the customer is clogged.
X Then press the start button to continue the drying
process.
«CLEAN FILTER C»
X Filter C, at the bottom left in the base plate, must be
cleaned. The message switches off as soon as the filter
is removed (see chapter «Start the programme/ Filter C»).
«BASE PANEL / FILTER»
X Check whether the filter at the bottom left is correctly
fitted (Filter C, behind the maintenance flap/see chapter
«Start the programme/ Filter C»).
If the machine displays an F - - error message:
X Interrupt the programme using the fast forward button
and select a new programme.
If error messages appear repeatedly:
X Switch off the power for around 1 minute and switch
it back on again (pull out the plug or switch off at the
wall).
 The machine is ready for use again when the pro-
gramme control lights flash.
X Select a new programme.
If an error message appears again:
X Make a note of the error message.
X Unplug the machine or switch it off at the wall.
X Notify customer services.
Error messages / Cash Card
The following error messages are connected with the
Cash Card.
«CARD UPSIDE DOWN»
X Insert the Cash Card with the
wards.
«CARD EMPTY»
X Use a charged Cash Card.
«INVALID»
X The Cash Card being used is not permitted. Notify the
person responsible for the facility.
«CASH CARD TAKEN OUT TOO QUICKLY»
X Wait 5 seconds until the amount on account has been
deducted and the new Cash Card balance appears.
symbol facing up-