Dorner 2200 Series Installation, Maintenance & Parts Manual
Side mount drive package
Hide thumbs
Also See for 2200 Series:
- Installation, maintenance & parts manual (100 pages) ,
- Installation & maintenance (78 pages) ,
- Installation & parts manual (50 pages)
Table of Contents
Related Manuals for Dorner 2200 Series
Summary of Contents for Dorner 2200 Series
- Page 1 2200 and 2700 Series Side Mount Drive Package Installation, Maintenance & Parts Manual For other service manuals visit our website at: www.dornerconveyors.com/manuals-literature Record Conveyor Serial Number Here 851-733 Rev. E...
-
Page 2: Table Of Contents
Return Policy..............20 Introduction Dorner’s Limited Warranty applies. IMPORTANT Dorner 2200 Series conveyors are covered by patent number 5,174,435, 6,109,427, 6,298,981, 6,422,382, 6,685,009 and Some illustrations may show guards corresponding patents and patent applications in other removed. DO NOT operate equipment countries. -
Page 3: Warnings - General Safety
CONVEYOR. A WARNING DO NOT OPERATE CONVEYORS IN AN EXPLOSIVE ENVIRONMENT. A WARNING Dorner cannot control the physical installation and application of conveyors. Taking protective measures is the responsibility of the user. Exposed moving parts can cause severe When conveyors are used in conjunction injury. -
Page 4: Product Description
E = 90 Industrial Mount Style = Side Mount Language Code: M = U.S. English U = CE English 22 = 2200 Series Conveyor 2L = 2700 Series Conveyor Table 1: Gearmotor Specifications - Standard Load U.S. Version Single Phase... -
Page 5: Ce Version
35.5 62Z020ES4(vp)FN 21.2 62Z010ES4(vp)FN 11.4 62Z005ES4(vp)FN (vp) = voltage and phase 23 = 230 V, 3-phase 21 = 230 V, 1-phase 43 = 400 V, 3-phase 2200 and 2700 Series Side Mount Drive Package 851-733 Rev. E Dorner Mfg. Corp. -
Page 6: Version 42Cz C Face (60 Hz Gearmotors)
Table 6: Belt Speeds for Variable Speed SEW Gearmotors Part Number In-lb Ft/min (max) Ft/min (min) M/min (max) M/min (min) 22M039WS423EN 22.9 16.2 22M017WS423EN 18.0 38.2 11.6 22M008WS423EN 14.9 76.8 12.8 23.4 2200 and 2700 Series Side Mount Drive Package Dorner Mfg. Corp. 851-733 Rev. E... -
Page 7: Version (60 Hz Gearmotors)
56.0 Nm 8 mm 97.5 Nm 6 mm 48.0 Nm 5 mm 35.0 Nm (496 in lbs) (863 in lbs) (425 in lbs) (310 in lbs) 2200 and 2700 Series Side Mount Drive Package 851-733 Rev. E Dorner Mfg. Corp. -
Page 8: Installation
Figure 5 Figure 2 Figure 5 Be certain 3 jaw coupling is fully on shaft and secure position with set screw (Figure 5, item 3). Figure 2 2200 and 2700 Series Side Mount Drive Package Dorner Mfg. Corp. 851-733 Rev. E... - Page 9 Slide and pivot gearmotor and gearmotor mounting ring Figure 10 (Figure 7, item 3) onto four screws (Figure 7, item 4) (through slots in gearmotor bracket). Figure 10 2200 and 2700 Series Side Mount Drive Package 851-733 Rev. E Dorner Mfg. Corp.
-
Page 10: Preventive Maintenance And Adjustment
Figure 13 Remove spider bushing (Figure 13, item 3) from mating female portion of 3 jaw coupling on gearmotor assembly (Figure 13, item 4). Figure 11 2200 and 2700 Series Side Mount Drive Package Dorner Mfg. Corp. 851-733 Rev. E... - Page 11 (Figure 15, item 4) will be during installation on conveyor. 11. Install screws (Figure 15, item 1) and tighten to 60 in-lb (7 Nm). 12. Install components in reverse order of removal. 2200 and 2700 Series Side Mount Drive Package 851-733 Rev. E Dorner Mfg. Corp.
-
Page 12: Motor Replacement
Figure 18 Record wire colors on terminals 1, 2 and 3. Loosen wire nuts and remove wires 1, 2 and 3. Loosen cord grip and remove cord. 2200 and 2700 Series Side Mount Drive Package Dorner Mfg. Corp. 851-733 Rev. E... -
Page 13: Notes
Notes 2200 and 2700 Series Side Mount Drive Package 851-733 Rev. E Dorner Mfg. Corp. -
Page 14: Service Parts
Service Parts NOTE For replacement parts other than those shown in this section, contact an authorized Dorner Service Center or the factory. Key Service Parts and Kits are identified by the Performance Parts Kits logo . Dorner recommends keeping these parts on hand. - Page 15 Flat Head Screw, M10-0.50 x 20 mm (for 56 C Face Gearmotors) Service parts can be obtained through your distributor or directly from Dorner Mfg. Corp. (800) 397-8664 or customerservice@dorner.com 2200 and 2700 Series Side Mount Drive Package 851-733 Rev. E...
-
Page 16: 2700 Series Side Mount Drive Package
Service Parts 2700 Series Side Mount Drive Package 2200 and 2700 Series Side Mount Drive Package Dorner Mfg. Corp. 851-733 Rev. E... - Page 17 Socket Head Cap Screw, M6-1.00 x 20 mm (for 56 C Face and IEC Gearmotors) Service parts can be obtained through your distributor or directly from Dorner Mfg. Corp. (800) 397-8664 or customerservice@dorner.com 2200 and 2700 Series Side Mount Drive Package 851-733 Rev.
-
Page 18: U.s. Version Gearmotors
Service parts can be obtained through your distributor or directly 32MES223EN Motor, 0.75 hp (0.56 Kw), 208-230/460 Volts, 60 Hz, 3 Phase, Variable from Dorner Mfg. Corp. (800) 397-8664 or customerservice@dorner.com Frequency 826-805 Motor, 0.50 hp (0.37 Kw), 332/575 Volts,... -
Page 19: Ce Version Gearmotors
230/460 Volts, 60 Hz, 39:1 Service parts can be obtained through your distributor or directly 22M017WS423EN Gearmotor, 0.33 Hp (0.25 Kw), from Dorner Mfg. Corp. (800) 397-8664 or 230/460 Volts, 60 Hz, 16.5:1 customerservice@dorner.com 22M008WS423EN Gearmotor, 0.50 Hp (0.37 Kw), 230/460 Volts, 60 Hz, 8.2:1... -
Page 20: Return Policy
Return Policy Returns must have prior written factory authorization or they will not be accepted. Items that are returned to Dorner without authorization will not be credited nor returned to the original sender. When calling for authorization, please have the following information ready for the Dorner factory representative or your local distributor: Name and address of customer.
Need help?
Do you have a question about the 2200 Series and is the answer not in the manual?
Questions and answers