Disabling And Reenabling Rules - Nortel 2350 Reference Manual

338 Verifying Configuration Changes
To change verification options
1
On the toolbar of the Verification panel click the Edit Verification Options icon. The
Verification Options dialog box appears.
2
Select the cases in which you want WLAN Management Software to perform verification:
• Verify changes only—WLAN Management Software performs verification only on
configuration items that change, instead of verifying the entire configuration when
any change in that configuration occurs.
• Verify on edits—WLAN Management Software performs verification whenever you
edit a switch's configuration.
• Verify on deploy and export—WLAN Management Software performs verification
when you select the option to deploy switches from WLAN Management Software to
the live network.
• Verify on upload—WLAN Management Software performs verification when you
select the option to upload a switch's configuration from the network into WLAN
Management Software.
• Allow errors to be deployed and exported—WLAN Management Software allows
you to deploy or export a switch's configuration even if it contains errors.
Note.
configuration errors. Allowing configuration errors to be deployed to the network
can affect network stability.
3
Click Close to place the changes into effect and close the dialog box.

Disabling and Reenabling Rules

If you disable a rule, you can use the Verification Options dialog box to reenable the rule. You also can disable
rules, for the entire network plan or for specific instances.
To disable or reenable a rule
1
On the toolbar of the Verification panel click the Edit Verification Options icon. The
Verification Options dialog box appears.
2
Click Rules Control. The list of WLAN Management Software verification rules appears.
3
Locate the rule you want to disable. You can click on the Class or Rule headers to sort
alphabetically by rule class or by rule name. You also can filter the display to show only the
rules in a specific class.
To filter the rule list based on class:
a
Click Filter By Class. The rule list changes to list the rules in the selected class.
b
Select a rule class from the listbox. The list of rules changes to list the rules in the selected
class. In this example, the selected rule class is 802.1X Network Access.
4
In the Enabled column, click on the checkbox next to the rule.
NN47250-102 (320666-G Version 02.01)
Nortel recommends that you do not deploy a network plan that contains